Wilson Benesch Square Centre
|
| The Square Centre is a low profile, high power solution to providing a channel of sound. Although it is called Centre Square, it should be appreciated that it can be seen as a very flexible design, that goes beyond the confines of being just a centre channel. It can be deployed against the wall in either a horizontal or vertical orientation. As a discrete component, it provides building block flexibility, with high output acoustically matched performance. As the rear wall forms an intrinsic part of this design, the two A.B.R.’s in this case, are located in the side of the enclosure. Both the mid range, and bass driver, benefit from the A.B.R. Like all Wilson Benesch loudspeakers that use two or more Tactic drive units, it is a two and a half way design, so phase is as pure as possible.
Significantly, all these designs are capable of being enhanced by adding the Torus Infrasonic generator. By extending the frequency response well beyond 20 Hz, they are capable of providing a quality of performance that is well beyond many “high end” systems costing significantly more.
|
| Technische Daten: |
| Description: |
2.5 Way, true linear phase, wall placement orientated monitor |
| Drive units: |
1 x 170mm (7in) Wilson Benesch Bass Unit
1 x 170mm (7in) Wilson Benesch Mid Range Unit
1 x 25mm (1in) Soft Dome Hand painted Silk, Ultra Linear Wilson Benesch Specific Tweeter |
| Low frequency loading: |
Double chamber, assorted bass radiator enhanced |
| Frequency range: |
-6dB at 65Hz and 30kHz
-3dB at 70Hz and 25kHz |
| Frequency response: |
70Hz to 24Hz +/- 2dB on axis |
| Sensitivity: |
88dB spl at 1 metre on axis 2.83V Input |
| Impedance: |
6 Ohms nominal, 4 Ohms minimum |
| Crossover: |
First order bass roll-off
Second order tweeter crossover
Selected polypropylene capacitors and air cored inductors are used throughout |
| Crossover frequencies: |
Tweeter 5kHz
Bass 500Hz |
| Internal wiring: |
Multi-stranded, silver plated copper, PTFE jacketed cable harnesses. Soldered connections throughout. Short path PCB design
Links supplied for single or bi-wire application |
| Input connections: |
Bi-wireable, in-house machined rhodium plated copper alloy terminals |
| Power handling: |
200W peak unclipped program |
| Dimensions: |
Height 210mm
Width 790mm
Depth 200mm |
| Internal volume: |
14 Litres |
| Net weight: |
22Kg
With Stand 34Kg |
